Rocky Roads, Custom Ford Broncos  

1966 Bronco uncut 5.0 liter 'Old School' Classic Bronco

Year: 1966 Color: Wind Blue with white Price: SOLD
Updated: 1/31/2019 4:43:51 PM
Engine: 430HP Coyote engine
Transmission: 4R70W 4 speed automatic , Atlas 2 Transfer case
Exterior: Match Painted Flares , Soft Top , Original Bumpers , Stock steel hood , New windshield and seal , New lights and lenses , Removable door hinges , Legend 6 point family roll cage , Wire brush prepped & Undercoated , factory antenna , factory chrome mirrors
Interior: Custom high back seats , Roll Cage Padding & Wrapping , Roll bar braces , Tuffy locking glove box , Shoulder belts , Custom snap in-and-out carpet mats , vinyl tailgate panel , vinyl rear side panels , vinyl door panels , Vintage Air system , Dakota Digital Insturment cluster , Custom Legend dash , power door locks , power windows
Brakes: 17" Wilwood 4 wheel disc brakes , New Lines , New Master Cylinder , Hydroboost
Steering: Modified Power Steering , Modified Steering Wheel , Ram assist
Suspension: WCB Extended Radius Arms , 2" body lift , 11 Leaf Spring packs , 2.5" Lift
Features: component speakers , Custom Stereo , amplifier
Electrical: New Centek wire harness , optima battery
Tires: 33" all terrains
Wheels: Black Fuel 17x9" wheels
Fuel System: 23 gallon F.I. fuel tank
axles: Big bearing Ford 9" , 4.56 gears , currie 31 spline axles , limited slip Ford 9"
This 1966 Classic Un-Cut Ford Bronco is 100% rust-free. Every aspect of this Bronco has been replaced with new during the restoration process.

In this 'Factory Plus' version Bronco is a daily driver. This Bronco just got a rebuilt 302 engine with 40HP more than factory, with a new FI Tech fuel injection and serpentine belt system. Everything in the engine bay is brand new, including all parts surrounding the engine, plus a 4 speed 4R70W automatic transmission, along with a rebuilt Dana 20 transfer case.

The Bronco was completely rebuilt from top to bottom. The Dana 44 front end & rebuilt Ford 9" rear end have new 4.56 gears, new axles, new axle seals, new bearings and new Tom Woods front and rear drive shafts. It got a new tilt steering column, new wood grain Grant GT steering wheel, new 4 turn power steering, with all new steering linkages and alignment for the best steering possible.

To make this Bronco stop exceptionally well, we installed a new Hydro boost brake system, new four wheel disc brakes, plus new stainless steel hard and soft brake lines running down the chassis and to both axles. The suspension is a 2.5" suspension lift with restored factory radius arms, with new Bilstein shocks all around, all new suspension bushings, and new body bushing hardware, all new electrical system with a new Centek wire harness.

The body was prepped and painted in a Wind Blue factory color, with a white two-tone grille and grille trim. The frame was sanded, prepped and powder coated. The body has factory Un-Cut fenders in front and in the back. The paint job has a high quality clear coat, and a new stock steel hood, with all new hardware, including new squirters, hood latch, secondary latch and spring, plus a new hydraulic hood prop system. It got all new steel fuel lines going down the frame, plus a new 23 gallon fuel tank. The body got all new stainless steel & grade 8 hardware throughout. Everything on this build is now new and every part we installed is top-of-the-line.

The interior is restored Parchment colored pleated vinyl factory front and rear stock Bronco seats, with all new matching pleated (high quality) German vinyl door, rear side and tailgate paneling, with a fresh Polyurea interior bed liner. We match painted a clean stock dash board, then added a new Vintage Air system, with a factory glove box and new glove box liner. The dash has 2 round A/C vents in the center of the dash, and two rectangular vents on the sides.

We installed a new black locking center console with a matching armrest pad on top, along with a new Alpine 164 CD bluetooth sound system installed in the center console with a set of Alpine C-5.25 (5 1/4") component speakers recessed into the rear side panels, and a second set of Alpine C-6.25 6.5" component speakers in the back of the rear side panels.

It has a new black powder coated 4 point Legend rear roll cage with retractable front and rear seat belts. The bumpers are chrome in front & in back. The windshield & seal and wing windows, and the window glass in both doors are all new. It got a new black soft top plus a new black Safari top for when the soft top comes off.

All door window felts and channels have been replaced with new, and the door inner latches and pulls are new as well. It has been re-sealed throughout with all new door upper and lower seals, a new tailgate track and seal, plus all other related seals.

It just got a set of new Smooth Retro 17x7" wheels with Derby hub caps. This Bronco was delivered in the summer of 2019, and our client is thrilled to have a new fully customized Rocky Roads Bronco in her driveway.

This Bronco was sourced and restored for a total cost of around $145,000.00. We are building another one just like this one, the 1970 Cool Blue un-cut Bronco, which is going to look very similar to this one, but in Cool Blue. If you get your deposit in before someone else does, this next one could be yours!

Call Shaun to inquire 310-293-7801

1/31/2019 - With safari top new wheels and 17x7 inch tires
1/21/2019 - Almost done
9/18/2018 - doors and electrical system coming together
9/6/2018 - Back from paint
7/23/2018 - Chassis powder coated, body painted with Wind Blue 2 stage paint
4/28/2018 - It could look like this
3/21/2018 - Body at paint shop, nearly ready for paint
3/4/2018 - This 1966 Coyote Bronco could like like this
1/26/2018 - Body is nearly ready for paint
11/22/2017 - This Bronco could look like this
10/9/2017 - Ready for restoration
Rocky Roads Facebook
Copyright © 2019.  Web Hosting / SEO by DEENT.